How to Drain a Pool | Easy and Quick Way

Drag to rearrange sections
Rich Text Content

Do you want to have a pool ready in this scorching summer at all times but find draining it to be a hassle? Don't worry, draining a pool isn't as difficult as it seems. Draining the pool has never been made this easy. Now it’s possible to drain the pool without damaging it.

All you need is to give some of your time to the pool, and then you can sit back and enjoy your summers.

People know that owning a pool can be pricey and burdensome, but maintaining a pool has gotten so easy with an easy draining process.

Since supplies and equipment are costly, it is important to save expenses wherever feasible.

Draining a pool after a specific time is required. That is why having a handy draining plan beforehand makes everything easy.

The task of draining a pool is complex, but with correct information, everything becomes simple. Professionally empty the pool with the steps provided below.

Different Ways of draining a pool

Method to Drain an Inground Pool

Emptying an inground pool is significantly more complicated than emptying an above-ground pool.

First, disconnect the pool pump, any illumination, self machines or timers.

All of these pieces of machinery are cooled by liquid, so leaving them without water will cause them to break.

Then, insert a water hose large enough to accommodate the drainage where you are permitted to dispose of the pool water. 

Connect the line to the submersible pump system and lower it into the pool's deepest portion. Attach the pump to the pool's ground circuit plug without extension cords.

The pool pump should be audible; therefore stay close to the pool. Examine the hose to ensure that the water is draining correctly.

Across the draining, keep a keen eye on the pool.

Whenever the water level drops low enough that the pump cannot eject any more water, shatter the cover coating on the plugs with a hammer and loosen the plugs with an instrument to allow subsoil water to infiltrate the pool.

Don't be concerned if there's a lot of flow and pressure. Also, the plugs are prone to become broken, so have spares on hand.

Enable the water to be extracted by the pool pump. There are usually two or three plugs in your in-ground pool, so it is better to remove every one of them but prioritise the present in the deepest end.

It will be the fastest way to relieve the upward tension, and you won't have to contend with flowing water from the other plugs. This strategy will also help you to avoid pool pop.

Before reloading, be sure to change the plugs. These simple measures are pretty easy, so follow these techniques, and you can avoid destroying your pool and flooding your area.

When the restorations or upkeep are completed, you must have no trouble filling your pool with fresh water to enjoy for many more seasons. You can read more about draining an inground pool here.

Method to  Drain an Above Ground Pool

Although emptying an above-ground pool has become less dangerous than emptying an inground pool, it still needs a correct procedure with correct follow-up steps.

There’s no chance of uncertainty if you get a specialist, but even after that, if you want to empty your above-ground pool for any reason, it can very easily be done with some simple steps.

Emptying an above-ground pool is very similar to an in-ground pool. We will use a submersible pump system to drain the pool.

After emptying the pool water, remove all the items that can get damaged during the modifications or destroyed without water to cool them down. The water discharge is the same in both the pool types.

Any leftovers would be removed by scooping them up. After draining the pool water, perform the required modifications, let it dry, and get fixed.

After completing all this, fit all the removed parts and fill in the water. Now your pool is ready for the water sports season.

How to Drain a Swimming Pool Using a Cartridge Filter

In pools equipped with cartridge filters, there are two options to drain them.

The first is using the drain plug to turn off the water supply. Unplug the drain plug at the rear of the filtration system and restart the pump and let the water flow till it gets to the stage where you need it to empty it.

Restart the pump and replace the plug in the drain plug. If your system contains a nozzle in between the pump and the filter, then this step is very crucial for you.

To prevent water from entering the filter, turn off the pump and twist the valve. Water will gush out of the opening when you turn on the pump.

When you've extracted enough water, switch off the pump and return the three-way valve to its original position. This allows water to travel from the pump back into the filter.

Method to Drain a Pool with a Sand Filter

Turn off the water pump. A filtration hose should be rolled out into the yard or a specific emptying place. Move the multi-port valve to the waste draining position.

Now simply integrate the pump appropriately and turn it on. After that, turn off the pump once you've removed the necessary water from your swimming pool.

Then again, rotate the multiport valve and change it to filter mode and get the backwash hose and get it to drain all the pool water.

Wrapping Up

Learning how to drain a pool has never been easier; regardless of the kind, it is crucial to total swimming pool maintenance.

After you've done it a few times, it won't seem so scary. Follow all the methods and rules, especially if you have different types of pools.

The ability to empty your swimming pool to execute modifications or additions such as coating will guarantee that your pool functions correctly and looks beautiful.

Lastly, now enjoy and beat summer with fun.

rich_text    
Drag to rearrange sections
Rich Text Content
rich_text    

Page Comments